Triblock UMA-04.04.01
Set of equipment for filling drinking water into PET bottles with a capacity of
5 or 6 liters
The rinser captures 4 bottles at the same time
4 bottles are simultaneously fixed in the filling module and 4 piston dispensers fill them with water
The capping module has a separate control system
All machines are connected by a conveyor
Set of equipment for filling drinking water into PET bottles with a capacity of
5 or 6 liters. The bottles are transferred to rinser by means of conveyor. The rinser captures 4 bottles simultaneously and tilts them. Water is supplied through the nozzles to the cavity of the bottles under pressure. After rinsing, the bottles are returned to the conveyor. Further on, the bottles arrive for filling on the conveyor, and new ones enter the machine instead.

4 bottles are simultaneously fixed in the filling module and 4 piston dispensers fill them with water. The capping module provides automatic orientation of caps in the hopper, their supply to the place of capping, automatic capping process and screwing on the bottle.
The capping module has a separate control system that is interconnected with the control system of the rinsing and filling machines. All modules are connected to each other by a conveyor that has its own drive.


Technical characteristics

  • Machine type — linear.
  • Output - up to 800 bottles / hour with a capacity of 5.0 liters.
  • Number of simultaneously rinsed bottles - 4.
  • Number of simultaneously filled bottles - 4.
  • Number of capping heads - 1.
  • Type of head - with an adjustable magnetic coupling of the limiting moment.
  • Pneumatic System — "Camozzi".
  • Electrical equipment components — Electronic control system based on elements of Schneider
  • Electric, Moeller, Omron, Delta or other manufacturers (at the request of the customer)
  • Overall dimensions (LxWxH) mm - ~ 4000×1200×2500.
  • Installed electric power — 50 Hz 3F 380V 2.5 kW (no more).
  • Compressed air consumption — ~ 3 m3/h. at a pressure of 5 kg / cm2.
  • Weight ~ 1000 kg (max).


Units of equipment

1. Rinsing module.
Designed for rinsing PET bottles before bottling
with a capacity of 800 bottles/hour.

Rated output - 800 bottles / hour.
Linear module type.
Number of rinsing devices - 4.


2. Filling module
Set for filling drinking water into PET bottles with a capacity of
5 or 6 liters.

Rated output - 800 bottles / hour.
Linear module type.
Number of dispensers - 4 pcs.
Type of dispenser-piston
Type of filling- according to volume.


3. The capping module
Designed for capping PET bottles with a capacity of 5 or 6 liters
with plastic screw caps with a ring- pull.

Rated output - 800 bottles / hour.
Linear module type.
Number of capping heads - 1.
Capping head-adjustable with magnetic coupling.
Cap orientation - automatic orientator.
Cap installation - automatic.
This equipment can be upgraded and adjusted to your production line
Get a consultation or a commercial offer
To receive a commercial offer, fill in the form below, we will contact you during the working day within a few hours
Kakhovske Highway, 20/3, Melitopol 72311, Zaporizhzhia Region, Ukraine
Opening hours: Mon-Fri from 08:00 to 17:00
Other equipment of the category