Filling machine UMA-00.12.00
The turret type machine is designed for filling carbonated and non-carbonated beverages
in glass or PET bottles in filling lines with output of up to 2000 bottles / hour.
Rated output - up to 2000 bottles / hour
All elements of the machine are mounted on a carbon steel frame covered with a stainless steel sheet covering.
The design of the machine provides for moving glass bottles by the bottom, and PET bottles by the neck.
Moving PET bottles by the neck allows filling bottles with a capacity of 0.5 to 2.0 liters without changeover.
The design of the machine provides a system "no bottle — no filling"
Elements of Camozzi pneumatic system. STM reducers. SKF bearings. Optex, Carlo Gavazzi, Autonix sensors.
The turret type machine is designed for filling carbonated and non-carbonated beverages
in glass or PET bottles in filling lines with output of up to 2000 bottles / hour. All elements of the machine are mounted on a carbon steel frame covered with
a stainless steel sheet covering.

The design of the machine provides for moving glass bottles by the bottom, and PET bottles by the neck. Moving PET bottles by the neck allows filling bottles with a capacity of 0.5 to 2.0 liters without changeover.

The design of the machine provides for a "no bottle — no filling" system, which ensures that the product is filled only if there are bottles under the filling cartridges.

A special mechanism provides instant slamming of the filling cartridge in the event of a break in the bottle under it.

All the elements of the machine that have contact with the product are made of AISI
321 stainless steel, as well as rubber and plastics certified for use in the food industry. These materials are neutral to all packaged products and cleaning solutions, and do not affect the quality of product preservation. The hull of the machine body is made of stainless steel and monolithic transparent polycarbonate.
The machine is adapted for connecting to a looped CIP sink for direct and reverse flow sanitation.


Equipment:

Electronic control system based on elements of Schneider Electric, Moeller, Omron, Delta or other manufacturers (at the request of the customer). Industrial microprocessor with direct programming and non-volatile memory. Operator panel - a touch screen or a push-button station (at the request of the customer).

The machine drive is a programmable frequency converter. Provides smooth (with a set acceleration) start of the machine and speed control during operation and dynamic braking. The specified machine performance is shown on the display. Elements of Camozzi pneumatic system. STM reducers. SKF bearings. Optex, Carlo Gavazzi, Autonix sensors.


Features:

- increased drains that ensure rapid water removal during sanitation,
- can be adapted to the installation of a nitrogen injection system when filling still water in PET bottles.
Technical characteristics
This equipment can be upgraded and adjusted to your production line
Get a consultation or a commercial offer
To receive a commercial offer, fill in the form below, we will contact you during the working day within a few hours
Kakhovske Highway, 20/3, Melitopol 72311, Zaporizhzhia Region, Ukraine
Opening hours: Mon-Fri from 08:00 to 17:00
Other equipment of the category